Shenzhen chuangxin Instruments Co.,LTD . -

Shenzhen chuangxin Instruments Co.,LTD .

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

tracking test chamber
Specification: CX-L19
Detail: Tracking Test Chamber Products Information This machine is intended for ***ermining the degree of protection against formation of conducting paths in solid insulating materials, due to the electric stress and electrolyti...

needle flame tester
Specification: CX-Z18
Detail: Needle flame Tester The needle flame tester is used to assess the fire hazard of component materials, ***ermining whether the test flame causes ignition of parts, or if a combustible part ignited by the flame has a limited d...

horizontal vertical flame tester
Specification: CX-S16
Detail: Horizontal Vertical Flame Tester The LCX horizontal-vertical flame chamber tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for co***ring the ...

glow wire tester
Specification: CX-Z17
Detail: Glow Wire Tester To ***ermine the fire resistance by the fire hazard test in accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards. The ignition source is imitated by an electrically heated wire loop against...

iec60065 dielectric strength tester
Specification: CX-K06
Detail: IEC60065 Dielectric Strength Tester 1.Design Reference: IEC: IEC60065 Figure 6; UL:UL1310 Clause 40.2; GB:GB8898; 2.Application: &©|8226; It is mainly used for testing thin-layer insulation material ele...

e27 lamp holder gauges
Specification: E27
Detail: E27 lamp holder gauges Specifications: We provide customized service,welcome to contact with us for more ***ails. IEC60061-3 7006-27B-1 IEC60061-3 7006-28A-1 IEC60061-3 7006-50-1 IEC60061-...

ipx5 and ipx6 water spray nozzle
Specification: CX-IPX5/6
Detail: IPX5 and IPX6 Water Spray Nozzle Introducation: Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet hand...

test device ipx3 ipx4 spray nozzle
Specification: CX-IP3X/4
Detail: Test Device Ipx3 Ipx4 Spray Nozzle IPX3 and IPX4 Spray Nozzle IEC60529 1.Introduction: The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water...

iec61032 test finger probe
Specification: CX-2B
Detail: IEC61032 test finger probe IEC61032 IEC60335 IEC60529 hinged test finger probe 1.Application: This is the "nternational" test finger required by most IEC, EN and CSA Standards, in addition to many UL Stand...


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1